Sony MDS-501 User Manual
Minidisc recorder
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Table of contents
Document Outline
- WARNING
- Table of Contents
- What is the MiniDisc?
- Unpacking
- Do not throw away the carton and the packing material
- On battery life
- 1 Open the remote commander cover.
- 2 Insert two Sony SUM-3 (NS) batteries with correct polarity.
- (D POWER switch and STANDBY indicator
- CLOCK SET button
- [U POWER switch
- |4] CD-SYNC operation buttons
- Q] LINE IN (line input) jacks (phono jack)
- Digital sources with different sampling frequencies cannot be recorded through the digital input jack
- Setting the Clock
- Hold down CLOCK SET for about 2 seconds until the year starts to flash.
- After setting the minutes, press the AMS dial in synchronization with a time signal.
- Playing an MD (Normal Play)
- Playing an MD (Normal Play)
- To forward scan a track
- To backward scan a track
- 'o go forward or backward quickly
- Locate the track.
- Press DATE RECORDED.
- 2 Press the AMS dial or PLAY MODE.
- Repeat step 2 to enter other tracks.
- 4 Press ►'
- Press ► or the AMS dial.
- Checking the order of programmed tracks
- To erase programmed tracks
- To stop program play
- To cancel program play * •
- Playing Tracks Repeatedly
- Pausing After Each Track (Auto Pause)
- Press A. SPACE twice.
- To cancel the auto pause function
- Pausing in the middle of selections
- Press EDIT/NO.
- Restoring the recording mode to its factory setting
- If you start recording with All REC ON mode
- Press YES.
- To erase the entire content of an MD in All REC OFF mode (factory setting)
- Press YES.
- Press & EJECT to eject the disc
- Select the input signal to be monitored with the INPUT selector switch.
- Press • REC
- To stop the input monitor function
- ecoramg a uigita Source
- Recording a Digital Source
- Recording From the Line (Analog) Input Jack
- 8
- Restart the sound source to be recorded.
- 9 Press ■ to stop recording.
- To check the remaining time on the disc
- To pause recording
- Pre^ II.
- To eject a disc
- Using EDIT/NO to specify track marking
- 1 Press • REC (•) to change the recorder to recording pause.
- Piay the sound source to be recorded.
- Whiie monitoring the sound through the headphones, adjust the recording levei with the REC LEVEL controi.
- Set the amplifier function seiector to CD.
- For digital recording, select DIGITAL with the INPUT selector switch.
- Insert a CD into the CD player.
- Select the playback mode (shuffle play, program play, etc.) on the CD player.
- Press STANDBY.
- Press START.
- If the CD player does not start playing
- Just Recorded
- Marking Track Numbers While Recording (Track Marking)
- Press REC • (•) at the place you want to add a track mark while recording.
- Press EDIT/NO to display "LevelSync ?" during recording or recording pause.
- 2 Press YES twice to display "LevelSync ON."
- To cancel Automatic Track Marking
- When you want to mark track numbers after you've done the recording
- ■Editing a Recorded MiniDisc
- Editing Functions for a Recorded MiniDisc
- 3,7
- 2 Keep pressing EDIT/NO until "Divide ?" lights up.
- Press YES to divide the track.
- If the starting portion is incorrect, press EDIT/NO. (If it is okay, go to step 7.)
- Press YES or the AMS dial when the correct position is attained.
- To cancel the divide function
- To undo a track division
- Turn the AMS dial until the second track of the two to be combined appears.
- Keep pressing EDIT/NO until "Combine ?" lights up.
- Press YES.
- Verify the tracks, then press YES.
- To cancel the combine function
- To undo a track combination
- 4 Turn the AMS dial to specify the new track position.
- Press YES or the AMS dial.
- To cancel the move function Press!.
- 1.
- 4
- 2
- 3
- If you entered the wrong character
- Press NAME again.
- 1 Press NAME while the recorder is stopped.
- 2 Repeat steps 2 to 4 of "Labeling a track with the remote commander" on this page.
- Entering lowercase letters
- Entering numbers
- To cancel the title function
- Changing an existing title
- Erasing all recorded titles simultaneously (name erase function)
- If the "Protected" indication lights up
- When "TOC" flashes in the display window
- Timer-activated recording
- 1 Turn on the timer.
- 3 Set the starting time on the timer.
- 4 Set TIMER to REC.
- Notes on timer-activated recording
- Timer-activated playback
- 1 Turn on the timer.
- When timer-activated playback is completed
- When timer-activated recording is completed
- Specifications
- Display Messages
- System Limitations
- "Disc Full" lights up before the maximum number of tracks is reached
- The remaining recording time does not increase even after erasing numerous short tracks
- Some tracks cannot be combined with others
- Tracks created through editing may exhibit sound dropout during search operations.
- Track numbers are not recorded correctly
- "TOC Reading" indication appears for a long time
- Your MiniDisc recorder can be used to play back monaural format MDs.
- Guide to the Serial Copy Management System