To cancel the divide function, To undo a track division – Sony MDS-501 User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Press YES or the AMS dial when the
correct position is attained.
When the track has been divided, "Complete"
lights up for a few seconds and the newly created
track begins playing. The new track will have no
track title even if the original track was labeled.
C o n p 1 e i e
O
« a
• 7 • • «
1« It « M »
It «7 tt «
To cancel the divide function
Press EDIT/NO o r « .
To undo a track division
Combine the tracks again (see "Combining Recorded
Tracks" on page 38) then redivide the tracks if necessary.
I
Notes
I
If the "Protected" indication lights up
The recorder could not divide the specified track because the record-
protect slot on the disc is open. Divide the track after closing the slot.
When "TOC" flashes in the display window
Do not jog the recorder or pull out the power cord. After the
recorder updates the contents of the recording, 'TOC” lights up. If
you've made any changes to the MD, 'TOC" lights up. if you press
& EJECT or POWER at this time, 'TOC" flashes as the actual
contents of the MD are updated.
37