Press yes, Press yes again, To cancel the erase function – Sony MDS-501 User Manual
Page 35: Press edlt/no or
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Erasing an MD
Erasing a part of a track
Erasing a recordable MD deletes all recorded tracks.
Note
that once erased, a disc cannot be recovered.
a l■=l
1 1 @
1 » ] “ 1 • 1 i±d
y
on
1 2,3
ibe^oa^
__ IjCB
While the recorder is stopped, keep
pressing EDIT/NO until "All Erase ?" lights
up.
WT
1 a s 4 •
f i l l E r a s e ?
IS)
Press YES.
R l l E r a s e ? ? : • » • • <
t t t i
Press YES again.
When all recorded tracks have been erased,
"Complete" lights up for a few seconds
and the music calendar disappears.
C o n p 1 e i e
By using the dividing, erasing and combining functions, you
can erase specific portions of a track.
Example: Erasing a part of selection A
Part to be erased.
Track ____
number
1
— 1
1
2
3
1
1
®
c
1
Dividing
1
1
o
1
1
1
1
1
1
2
1
1
into 3
’
!
parts.
3 >4
1
1
1
1
5 •
A («1443)
' #1 and «3 are combined.
iNote^
If the "Protected" indication lights up
The recorder could not edit the specified track because the record-
protect slot on the disc is open, ¿lit the track after closing the slot.
When "TOC" flashes in the display window
Do not jog the recorder or pull out the power cord. After the
recorder updates the contents of the recording, "TCX)" lights up. If
you've made any changes to the MD, "TOC" lights up. If you press
& EJECT or POWER at this time, 'TOC" flashes as the actual
contents of the MD are updated.
To cancel the erase function
Press EDlT/NO or ■.
35