Locate the track, Press date recorded – Sony MDS-501 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Displaying the recording date
Once you've set the built-in clock, the recorder will
automatically record the recording date and time of all
tracks. Do the following procedure to display the recording
information during playback.
Remote commander operation only
Locate the track.
Press 1« or ►W while the recorder is stopped to
locate the track.
If the recorder is playing or paused, enter the track
number with the numeric buttons, or keep
pressing or until the number of the track
appears.
Press DATE RECORDED.
The track number flashes.
04n 23d
9 A 3
• '
O
SPT 09: 10 nil •
"No Date" appears if the built-in clock has not
been set or the track was recorded on another unit
without a date and time stamp function.
The previous display reappears when you press
DATE RECORDED again or after a few seconds
have passed.
17