To eject the disc, If there is no sound for more than 20 seconds, Using edit/no to specify track marking – Sony MDS-501 User Manual

Page 27

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

To eject the disc

Press ^ EJECT.

If there is no sound for more than 20 seconds

The recorder stops recording, keeps a 2-second blank
between tracks, and erases the remaining 18 seconds of
silence. E>uring the erasure, "Auto Cut" appears in the
display window.

1

— R u i o

C u C -

X 1

Using EDIT/NO to specify track marking
Press EDIT/NO during recording or recording pause to
specify manual or autonaatic track marking. For details, see
"Writing Track Numbers While Recording (Track Marking)"
on page 32.

I

Notes

I

MD recording and the Serial Copy Management System
Since the MD recorder uses the SCMS (Serial Copy Management
System), MDs recorded through the digital input jack cannot be
used to make copies onto other MDs (see page 48).

If “Protected" appears in the display window

The disc is record-protected. Close the slot to record on the disc (see

"To protect a MiniDisc against accidental erasure" on [>age 24).

When "TOC" flashes in the display window

Do not jog the recorder or pull out the power cord.

When recording from digital sound sources
The recorder automatically records track numbers in the same
sequence as the sound source (i.e., based on changes in the sampling

frequency of the input signal).

When dubbing from another MO
The recorder automatically records track numbers in the same
sequence as the source disc. However, if a track is recorded more
than once (i.e., due to repeated playback during program play or
single-track repeat play), the same track number is recorded each

time.
Note also that the recorder caimot create tracks of less than 4

seconds in length.

When you're digitally recording a disc from a SONY

portable MO player (or perhaps other devices), press ■
(on this unit) before stopping the MO player.
If you stop playing the MD player or disconnect the optical cable
from the DIGITAL IN of this unit before pressing ■, the MiniDisc
will not play when ► is pressed immediately after recording.
If you stop playing the MD player before you press ■, please
reinsert the recorded disc. Stopping play of the disc will not effect
the recorded contents of the disc.

27

Advertising