Displaying the recording date – Sony MDS-101 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Displaying the recording date
If you have set the built-in clock, the date and time of all
recordings are recorded and automatically displayed when
the disc is played back.
Remote commander operation only
1
Locate the desired track.
Press or while the unit is stopped to
locate the desired track.
Press DATE RECORDED.
O
“No Date” is displayed if the built-in clock has not
been set or the track was recorded on another unit
without a date and time stamp function.
The previous display reappears when you press
the DATE RECORDED button again or after a few
seconds have passed.
If the unit is playing or in pause, press to enter the
track number through the numeric buttons, or
or to display the desired track.
19