Sony MDS-101 - Manual (Page 25)

Recording a Digitai Source
Digital recording
Digital sources connected to the unit through the digital input
jack can be recorded onto a recordable MD. When recording
from a CD, track numbers on the original are automatically
recorded in the original sequence. When recording from
other digital sources than a CD, you can add track marks
automatically or manually {see page 31).
If the inserted disc already contains recorded material, the
unit will automatically record the new material at the end of
the existing material.
Press POWER.
ON/STANOBY
With the label side up and the arrow pointing
toward the opening, slide the recordable MD
into the disc compartment until the unit grips
It.
The total number of recorded tracks (Tr) and total
time appear. A music calendar showing all
recorded track numbers appears without a grid.
ISr-i
3
Press INPUT SELECTOR until “Digital in”
lights up.
The previous display appears again after a few
seconds.
O
INPUT
SELECTOR
D i g i t a l i n
Press REC#(«).
The unit enters recording pause.
(Q)
4 REC Ready
os
If nothing is connected to the digital input jack, the
"Din Unlock" indication appears.
Press^ll(^orll).
Recording pause is canceled and recording
starts.
¡>H
Play the sound source (CD player, etc.) to be
recorded.
The track number being recorded and elapsed
recording time appear.
0 0 n 0 1 S
■ ' II " goes off.
7
Press ■ to stop recording.
Recording stops.
25