Press yes when the correct position is found, To cancel the divide function, To undo a track division – Sony MDS-101 User Manual
Page 40: Changing the step interval in step 5, Dividing recorded tracks (divide function), Conp1ete
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Dividing Recorded Tracks (DIVIDE Function)
(Continued from previous page.)
Press YES when the correct position is found.
"Complete" lights up for a few seconds then
disappears, and the track is divided.
After track division, the newly created track
begins playing. The new track will have no track
title even if the original track was labeled.
O
Conp1ete
I
2 9^4
S.T
6 7 S i'lO
II 12 12 14 IS
16 17 It
To cancel the DIVIDE Function
Press or ■ to restore the normal display.
To undo a track division
Combine the tracks again (see “Combining Recorded
Tracks" on page 41) then redivide the tracks if necessary.
Changing the step interval in step 5
When “Rehearsal” lights up in step 5, press P.MODE to
select ±1 for a step interval of ±0.06 second, or ±2 for a step
Interval of ±0.12 second.
[Notes (
If the "Protected" indication lights up
The record-protect slot on the disc is open and the specified track cannot be
devided. Divide the track after closing the slot.
W hen “TOC" flashes in the display window
Do not jog the unit or pull out the power cord. After the contents of the recording
have been updated, TOC’ lights up. If any changes have been m ade to an M D. the
TOC" indicator lights up. W hen EJECT or POW ER is pressed at this tim e, the
TOC" indicator flashes and the actual contents of the M D are updated.
40