Sony MDS-101 - Manual (Page 31)

Track Marking During Recording
Track marking Is essentially adding tracks while recording.
By adding a track mark (new track number) at desired points,
you can quickly locate those points afterwards using the
AMS function. Track marks can be added automatically or
manually: (1) automatically by the system at points of low
signal level, and (2) manually at the points you want.
Automatic track marking
Press INPUT SELECTOR while the unit is in
recording or recording pause mode to display
“Level Sync ON”.
Level Sync UM
► II БШ
Manuai track marking
1 Press INPUT SELECTOR while the unit is in
recording or recording pause mode to display
“Level Sync OFF”.
While recording, press REC # (#) at the
point you want to add a track mark.
The track number increases by one, and
recording on the new track begins (the elapsed
recording time indication restarts from zero).
4 05n20s
TOC i ;
о
5 00fl0 1 S
»>-11 Ш
After a track has been recorded, you can divide it further into
more tracks to enable material to be quickly located using
the AMS function (see “Dividing Recorded Tracks" on page
39).
31