Sony MDS-101 - Manual (Page 45)

If you enter the wrong character
1 Press or ► » to move the flashing cursor under the
character to be corrected.
Labeling a disc
2 Press CLEAR to erase the incorrect character, then enter
the correct letter.
To cancel the title function
Press ■ .
Making a correction after entering a title
1 Press NAME while playing back or pausing the respective
track. The current track title lights up.
2 To enter an entirely new title, hold down CLEAR until the
current track title is erased, then enter the new track title.
To correct a part of the track title, use the same procedure
described In “If you make a mistake" above.
3 Press NAME.
Erasing all track titles on a disc
1 Hold down on the unit for about one second while
the unit is stopped until "All Erase?" lights up.
2 Press again until "Name Erase?" lights up.
3 Press YES.
I
Notes
I
If the "Protected” indication lights up
The record-protect slot on the disc is open and the specified track cannot be
labeled. Label the track after dosing the slot.
When "TOC" flashes in the display window
Do not jog the unit or puli out the power cord. After the contents of the recording
have been updated, TOC' lights up. If any dianges have been m ade to an M O, tl
TOC indicator lights up. W hen EJECT or POW ER is pressed at this tim e, the
TOC indicator flashes and the actual contents of the MD are updated.
2
3
1
Insert the disc to be labeled.
2 Press NAME while the unit is stopped.
A flashing cursor appears.
I name )
Enter one character at a time.
CDcpcpqjcp
ryi 1*7^ rp rp rp
Cp CS3 □□
S3 00I
Entering the letter “D”
(Continued on next page.)
45