Sony MDS-101 - Manual (Page 8)

Q] POWER switch
Press to turn on the unit; press again to change to stand-
by.
[2] Disc compartment
Automatically loads an inserted disc.
[3] EJECT ± button
Press to eject the disc from the disc compartment.
[4] REC (record) • button
Press once to activate recording pause. Press ► U to
start recording. Used also for track marking.
[5] REC (recording) LEVEL control
Turn to adjust the recording level when recording from
analog sources.
[6] Remote sensor
Accepts commands from the remote commander.
[7] YES button
Press to perform editing functions (i.e., erasing, dividing,
combining, and moving).
[8] button
Press to specify or cancel the various editing functions.
[g P.MODE button
Press to select playback modes (i.e., CONTINUE,
SHUFFLE, and PROGRAM).
tiol ^ (AMSVsearch) button
Press to find the desired point within a track or the
beginning of a track.
[0] ■ (Stop) button
Press to stop playback or recording, or to cancel program
play.
¡2| (Play/Pause) button
Press to start playback or recording. Press during
playback or recording to temporarily stop the MD; press
again to cancel pause.
¡I Display window
Indicates the current operating status.
INPUT SELECTOR button
Press to select the input signal to be recorded. Press
while the unit is stopped to select “Analog in" to record
through the LINE IN (analog) jack. Press to select “Digital
in" to record through the DIGITAL IN jack.
H Headphones level control
Turn to adjust the volume of the headphones.
iH Headphones jack
Connect headphones with a stereo mini-plug here.
j7] DISPLAY button
Press to display the name of the current track and the
remaining playing time on the MD.
M CLOCK SET button
Press to set the clock.
MIC (microphone) jack
Connect a microphone with a stereo mini-plug here.
' AMS: Automatic Music Sensor
8