Sony MDS-101 - Manual (Page 21)

When programming tracks 26 to 99, press >25 once
before pressing the numeric buttons.
When programming tracks 100 and above, press >25
twice.
Example: To program the 26th track
^ 0 cu 0 CO
/ G K
Example: To program the 100th track
Ш 0 ою 0 oa
(Press “10” to enter a zero)
b) When using the front panel:
1 Press ,53 Kt desired track
number lights up.
I I
03n 0Si
2 Press P. MODE.
The seiected track number is stored.
( P.MOOE I
03m 08s
Repeat step 2 to enter other tracks.
Each time you enter a track, the total program time
is displayed. Up to 25 tracks can be programmed.
4
Press »HI (► ).
Program play starts from the first track of the
program.
Oil
E M O T I O N
To monitor total program time while programming tracks
Perform the following in the place of step 2 above.
1 Press ,53 () or ) to select the track.
The total program time appears.
0rm ¿C.S
2 Press P.MODE (PROGRAM).
The selected track is programmed.
Checking the order of entered tracks
Press ,53 (Ki () while the unit is in
playback or pause mode.
To erase programmed tracks
By pressing CLEAR, you can erase one track at a time
starting from the end of the program.
To stop program play
Press ■ .
To cancel program play
Press P.MOOE (CONTINUE) until “PROGRAM" disappears.
To erase a programmed track just entered
Press CLEAR, then repeat the programming procedure from
step 2 on the previous page.
To erase all the programmed tracks
Press ■ while the unit is stopped, then repeat the
programming procedure from step 2 on the previous page.
21