Sony STR-DB940 - Manual (Page 5)

Antenna Hookups
AM loop antenna
X
O
o
3'
(fi
(D
n
o
3
?
3
«
iBmilnals for connecting ttie antennas
Connect the To the
AM loop antenna AM terminals
FM wire antenna FM 75Q COAXIAL terminal
#U»emi}ling tite swpplieci FM antenna
(Models of area code U,CA only)
The supplied FM wire antenna must be cormected to the
supplie(J FM antenna adaptor
Notes on antenna hooku|>s
• To prevent noise pickup, keep the AM loop anterma
away from the receiver and other components
• Be sure to fully extend the FM wire antenna
• After connecting the FM wire antenna, keep it as
horizontal as possible
^ If you have poor FM reception
Use a 75-ohm coaxial cable (not supplied) to connect the receiver
to an outdoor FM antenna as shown below
Outdoor FM antenna Receiver
If you cormect the receiver to an outdoor anterma, ground
it against lightning To prevent a gas explosion, do not
cormect the ground wire to a gas pipe
Note
Do not use the rh SIGNAL GND terminal for grounding the
receiver