Sony STR-DB940 - Manual (Page 83)

Press the appropriate button on the remote control
to send the remote control code
Lightly pressing the button once should be sufficient
In about 3 to 5 seconds, it is displayed whether
learning was successful or not
When the learning completes successfully, "Learning
OK!", the number of keys, and the capacity used for
learning are displayed
[UIDEO 2 ]
■ (PLAY)
Learning OK!
(15/80 20-/.)
when the learning does not complete successfully, the
cause is displayed
Learning NG!
*(PLAY)
p[J[_(_ (Keys) ---------- information*
^EXIT__________
* FULL (Keys): shortage of buttons
FULL (memory): shortage of memory
ERROR: other causes
To cancel learning
Move the easy scroll key to select "EXIT" or "CANCEL"
during any step, then press the key to enter the selection
To erase the learned code
In step 6 above. Move the easy scroll key to select "CLEAR",
then press the key to enter the selection The number of
buttons and the capacity used for learning are displayed
Q The marks that are displayed in front of the button name
indicate the following
■ : already learned
^ : pre-programmed
? In step 3, learned buttons can be selected directly
If you press the button you want to use for the Learned function,
the list will jump to the same button
9 The Learned function can be applied to the SUB menus
SUB 1 ~ SUB 5 can be learned
Notes
• You can program up to 80 buttons for the Learned function
In some cases, you may not be able to program even if you have not
programmed 80 buttons
• If you select "IR SET” for a component that already has a learned
button setting the learned codes for that component are cleared
Furthermore, if the cleared learned button is used in a Macro Play
setting the setting for that button will be changed to "NO SET"
Downloading Data From
the Receiver
The remote communicates with the receiver every time a
button is pressed on the remote and displays the current
operation status of the receiver on the display window
The remote can also download index names of the
program sources, preset stations, CD disc names
(memos)*, and information indicating the presence or
absence of a CD in each slot of a CD changer* from the
* Appears only when you have selected a Sony CD changer (5,50,200,
300, or 400 discs) connected to the receiver using the CONTROL A1
cable
Be sure to turn on the receiver and point the remote
towards the receiver when performing the following
procedure
1 Press SET UP.
The set up list appears
2 Move the easy scroll key to select "DOWNLOAD/'
then press the key to enter the selection
The DOWNLOAD list appears
3
<D0WNL0AD>
^FUNCTION
TUNER INFO
CD DISC NAME
To download index names
Move the easy scroll key to select "FUNCTION,"
then press the key to enter the selection
To download preset stations
Move the easy scroll key to select "TUNER INFO,'
then press the key to enter the selection
Using a command that has been learned
When selecting a learned function, press the button used
to learn that function
19