Sony STR-DB940 - Manual (Page 54)

s
y
ft
o
SI
o
3
ID
Adjustments Using the SET UP Button
Selecting the monitor color system
(STR-DB940 of area code other than U, CA)
Select the color system of your TV morritor You can select
either NTSC or PAL The default setting is PAL
1 Press SET UP.
2 Press the cursor buttons «[ or »to select
"COLOR SYSTEM"
3 Turn the jog dial to select "NTSC" or "PAL"
Selecting the color of the on-screen
display (STR-DB940 only)
Select the color of the on-screen display You can
select either COLOR or MONOCHROME The color of the
on-screen display is set to COLOR by default
1 Press SET UP.
2 Press the cursor buttons « or »to select "OSD
COLOR"
3 Turn the Jog dial to select "COLOR" or
"MONOCHROME"
Set the display to turn off
This parameter lets you specify whether or not the display
turns off when you press the DIMMER button several
times When "WIDE" is selected, you can set the display
to turn off, but when "NARROW" is selected, you carmot
set the display to turn off The default setting is set to
"NARROW"
1 Press SET UP.
2 Press the cursor buttons « or »to select "DIMM
RANGE"
3 Turn the jog dial to select "NARROW" or "WIDE"
CONTROL A1II Control
System
This section explains the basic functions of the
CONTROL A1II Control System Certain components
have special functions, like "CD Synchro Dubbing" on
cassette decks, that require CONTROL Alll
connections For detailed information regarding
specific operations, be sure to also refer to the
Operating Instructions supplied with your
component(s)
The CONTROL AlII Control System was designed to
simplify the operation of audio systems composed of
separate Sony components CONTROL A1II connections
provide a path for the transmission of control signals
which enable automatic operation and control features
usually associated with integrated systems
Currently, CONTROL AlII connections between a Sony
CD player, amplifier (receiver), MD deck and cassette
deck provide automatic function selection and
synchronized recording
In the future the CONTROL A1II connection will work as
a multifunction bus allowing you to control various
functions for each component
Notes
• The CONTROL A1II Control System is designed to maintain
upward compatibility as the Control System is upgraded to
handle new functions In this case, however, older components
will not be compatible with the new functions
♦ Do not operate a 2 way remote control unit when the
CONTROL A1II jacks are connected via a PC interface kit to a
personal computer running "MD Editor" or similar application
Also, do not operate the connected component in a manner
contrary to the functions of the application, as this may cause
the application to operate incorrectly.
CONTROL A1II and CONTROL A1 compatibility
The CONTROL A1 control system has been updated to the
CONTROL A1II which is the standard system in the SONY
300 disc CD changer and other recent Sony components
Components with CONTROL A1 jacks are compatible with
components with CONTROL A1II, and can be connected to
each other Basically, the majority of the functions available
with the CONTROL A1 control system will be available with
the CONTROL AlII control system
However, when making connections between components
with CONTROL A1 jacks and components with CONTROL
AlII jacks, the number of functions that can be controlled
may be limited depending on the component For detailed
information, refer to the Operating Instructions supplied with
the component(s)
54