Programming the remote, Ir set learning download auto power, Ir set> ^[uideo 1 ] [uideo 2 ] [uideo 3 – Sony STR-DB940 User Manual
Page 80: Maker? ->sony denon kenuiood
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Programming the Remote
3
la
You can customize the remote to match the components
connected to your receiver You can even program the
remote to control non-Sony components and also Sony
components that the remote is normally unable to control
The procedure below uses as an example a case in which a
Kenwood LD player is connected to the VIDEO 2 jacks on
the receiver
Before you begin note that:
— You cannot change the settings of TUNER and
PHONO
— The remote can control only components that accept
infrared wireless control signals
Be sure to turn on the receiver and point the remote
towards the receiver when performing the foiiowing
procedure
1
Press SET UP.
The set up list appears
^IR SET
LEARNING
DOWNLOAD
AUTO POWER
Move the easy scroii key to seiect "IR SET," then
press the key to enter the seiection
The IR SET list appears
<IR SET>
^[UIDEO 1 ]
[UIDEO 2 ]
[UIDEO 3 ]
5
Move the easy scroll key to select the maker of the
component ("Kenwood," for example), then press
the key to enter the selection
When programming the remote to control
Sony component
Select "Sony "
Programming is now completed
To cancel programming
Move the easy scroll key to select "EXIT" from the IR SET
list, or "CANCEL" from the CATEGORY list or MAKER
list, then press the key to enter the selection
Q You can freely assign any component to USER 1 and 2 Items
in the IR SET list
1
Do Steps 1 and 2 in "Programming the Remote"
2
Move the easy scroll key to select "USER 1" or "USER 2," then
press the key to enter the selection
3
Continue from Step 3 in "Programming the Remote" to select
the category and maker of the component
Note
If you select "IR SET" for a component that already has a learned
button setting, the learned codes for that component are cleared
Furthermore, if the cleared learned button is used in a Macro Play
setting, the setting for that button will be changed to "NO SET"
Move the easy scroll key to select the component
("VIDEO 2," for example), then press the key to
enter the selection
The CATEGORY list appears
Move the easy scroll key to select the category
(I e, the component that is actually connected to
the corresponding jacks; in this case, "LD"), then
press the key to enter the selection
The MAKER list appears
MAKER?
->Sony
DENON
Kenuiood
16