Sony STR-DB940 - Manual (Page 18)

Performing Initial Setup Operations
3
<&
3
a
V)
%
3
Ifi
I
3
Once you have hooked up the speakers and turned on the
power, clear the receiver's memory. Then specify the
speaker parameters (size, position, etc ) and perform any
other initial setup operations necessary for your system
Before turning on the receiver
Make sure that you have:
• Turned MASTER VOLUME to the leftmost position (0)
• Selected the appropriate front speakers (see "l27l
SPEAKERS selector" on page 30)
Performing initial setup operations
Before using your receiver for the first time, or when you
want to clear the receiver's memory, do the following
This procedure is not necessary if the demonstration
activates when you turn the power on
Before using your receiver for the first time, use the SET
UP button to adjust the setup parameters so that they
correspond to your system You can adjust the following
items For details on how to make adjustments, see the
page in parenthesis
• Speaker size and placement (pages 19-22)
• Speaker distance (page 19)
• Whether other components will turn on or off
automatically via the CONTROL A1 II control system
(page 53)
• Whether the display turns off or not when you press
DIMMER (page 54)
• STR-DB940 only;
- 2 way remote control system operation (page 53)
- Selecting the color of the on-screen display (page 54)
- Select the TV color system of the monitor (except for
models of area U, CA) (page 54)
settings
• All index names (of preset stations and program
sources) are cleared
• All adjustments made with the SET UP button are
reset to their factory settings
• The sound field memorized for each program source
and preset stations are cleared
18