Inserting new lithium battery – Canon E 77 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

13

Inserting New Lithium Battery

The CR2025 type lithium battery provides your camera with enough power to
store date and time settings, even when the camera is turned off.

One lithium battery will last approximately one year. When lithium battery is

not in place or is nearly exhausted, “E” appears in viewfinder, indicating that

the lithium battery needs to be replaced.

Be sure to connect the camera to a power source before changing the lithium
battery, otherwise date and time settings will be cleared from camera’s
memory and will have to be reset.

1

E

Slide open lithium battery
compartment cover on top

of camera until compartment

is exposed.

Insert a new lithium
battery with plus (+) side

facing out.

• Insert lithium battery in direction of arrow

and press in place.

0

0

(___)

0

0

t+1

0

0

3

Slide lithium battery
compartment cover back

into place.

• Make sure cover fastens properly (snaps into

place).

The battery used in this device may present a fire or chemical burn hazard if

mistreated. Do not recharge, disassemble, heat above 100°C or incinerate.
Replace battery with Panasonic CR2025 or Duracell DL20258. Use of another
battery may present a risk of tire or explosion.

• Make sure plus (+) side is facing out of battery compartment.

• Keep battery out of children's reach. If swallowed, contact physician

immediately.

• To ensure proper contact, wipe battery with clean, dry cloth before use.

• Do not pick up battery using tweezers or other metal tools which may cause

short circuiting.

• Do not disassemble, heat or immerse in water, to avoid risk of explosion.

• When "E” appears in viewfinder replace the old lithium battery with a new

one.

Advertising