Assembly editing, Press still button at recording start point, Turn camera off and then turn camera back on – Canon E 77 User Manual
Page 23: Press start/stop button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
21
Assembly Editing
Assembly editing usually operates automatically for smooth, noise-free
transition between shots. However, use manual assembly editing when the
video cassette has been unloaded during recording, camera has been turned
off before being placed in record pause mode, battery pack charge runs out
and turns camera off, or power source has been removed during recording.
1
Use playback functions to
find recording start point.
• Watch viewfinder and locate editing start
position.
• See pp.26~27 for playback functions.
2
Press STiLL button at
recording start point.
• Camera enters still playback mode.
3
Turn camera off and then
turn camera back on.
• Camera enters record pause mode.
t
loMEftÀTB
4
Press START/STOP
button.
• Recording begins.
• Tally lamp flashes rapidly.
• There may be some difference between point where you press STILL button
and point where actual recording starts.