Canon E 77 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
25
Setting the Video Channel (European model)
The RU-E3 is shipped from the factory with the video channel selector set to channel 32.
1
Connect RU-E3 to camera and TV.
a
Press camera’s operate button to turn
camera on and start playback.
3
Turn TV on.
4
Set l/G selector: I is for U.K, South Africa,
Hong Kong; G is for Continental European
countries.
5
Tune TV to channel 32 and adjust it until
playback picture appears clearly on
screen.
To set video channel to a position other than 32 (30-39 selectable), position 36 in U.K.
for example: Follow steps 1-5 above. Tune TV to channel 36. Then turn RU-E3’s
video channel selector with a flat-edge screwdriver until playback picture appears
clearly on screen again.
Switch Settings
RU-E3
(European model)
l/G selector: Set according to
TV system
fl g,^
(Australian model)
Video channel selector: To video
channel
Antenna Selector
For Playback; VTH
TV
ANT L VTH
'o' tr'
For Regular TV Viewing: ANT.
(European model)
/-------------------------------
Canon
TV
O
m
(MD
ANT-> 1- vrn