Playback procedure – Canon E 77 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
26
Playback Procedure
you must
complete
step G to
commence
playback.
1
a
3
4
5
6
7
8
Turn on TV.
Set TV to video channel or
video screen.
• When using a TV without audio/video inputs
set TV channel and RF Unit to video
channel.
• When using a TV with audio/video inputs set
TV’s TVA/IDEO selector to VIDEO.
Press EJECT button.
• Video cassette compartment opens.
EJECT^
Load video cassette in
camera and close video
cassette compartment.
lro"iT51
it
Turn camera on.
• Camera will go Into stop mode if erasure
prevention switch on video cassette is in
non-recordable position.
Í
OPERATEI
Press STOP button.
• Piayback functions will not operate if you
haven’t pressed STOP button.
Press PLAY button to start
playback.
• Use FF or REW buttons to locate playback
start point.
• Tape speed is selected automatically.
PLAY
Press STOP button to end
playback.
C
d
STOP
Playback is aiso displayed in the viewfinder.