Camera preparations, Attaching and removing lens cap and lens hood, Adjusting grip belt – Canon E 77 User Manual
Page 16: Adjusting diopter
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
14
Camera Preparations
Attaching and Removing Lens Cap and
Lens Hood
Remove lens cap before recording and hook it onto grip belt using clip on lens
cap. Replace lens cap again when you stop recording or turn the camera off.
When you attach a filter to the camera lens, also attach a lens hood to the
filter so that the lens cap will still fit tightly.
Focusing Ring
Filter
Lens Cap
To remove the lens hood, hold focusing ring and
filter with one hand and loosen the lens hood
using the flat palm of your other hand (not your
fingers).
Lens Hood
Lens Hood
Adjusting Grip Belt
Tighten or loosen grip belt as necessary for a
comfortable fit while holding grip with your
right hand.
Adjusting Diopter
Adjust the diopter to individual eyesight
correction when using the camera for the
first time or when changing camera
operators.
Simply turn the camera on and look
through the viewfinder, turning the diopter
adjustment ring until the viewfinder
displays are clearly visible.