3 stopped'down (fixed index) metering – Canon T 90 User Manual
Page 131
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3 Stopped'down (Fixed Index) Metering
• Please see p 115 on the exposure warning
displays
and
the
countermeasure
for
this
case.
Correct exposure
Underexposure
Overexposure
The shooting objectives of this mode are the
same as for stopped-down AE mode, but this
mode needs manual operation.
1) Set the display panel to'Tv".
2) Set the desired shutter speed by turning the
electronic input dial.
3) When using an FD lens, remove the aperture
ring from the “A” mark
4) Push in the stop-down lever An “ O ” nrark
will then be displayed on the display panel.
5) Check the exposure in the viewfinder
• In the viewfinder, any one of “
[ } P
”, “
oo ”,
or “
C i
” is displayed as well as the shut
ter speed you have set The meaning of
each display is as follows:
U P
o o
underexposure (Open the aperture)
correct exposure
overexposure (Close the aperture.)
78