Automatic film winding speed changeover function – Canon T 90 User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Automatic Film Winding Speed
Changeover Function
The Canon T90 has an automatic film winding
speed changeover function which will change the
film winding speed from HIGH to LOW mode when
battery power drops below a prescribed voltage.
This saves battery energy and extends battery life,
so more pictures can be taken with the same batter
ies.
When the winding speed is automatically switched
to the LOW from HIGH, the mark pointing at the
HIGH on the display panel starts blinking to warn
you.
In this case:
1
It you wish to drive the camera in the HIGH
mode, replace the batteries with new ones
2
It you want to make the blinking stop,
though you continue to shoot in the LOW mode,
press the film winding mode button to set the
"►" mark to LOW mode on the display panel.
35