6 loading the film, Loading the film, Caution – Canon T 90 User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
6 Loading the Film
1)
To open the back cover, push
the
back
cover
latch
down,
while
pressing
the
back
cover lock button.
2)
Insert the upper flat end of
the film cartridge into the film
chamber first, then lower the
other
end.
The
film-load
check mark (
) will then
appear on the display to indi
cate that film is loaded.
3)
Pull the film leader across the
back of the camera until its
tip is aligned with the orange
index.
CAUTION
•
Before loading the first film cartridge, remove the plastic insert and throw
it away.
• NEVER touch the shutter curtain. It is sensitive to pressure due to its high
precision design.
•
Be careful that the film leader does not touch the shutter curtain, either.
28