Changing the preset exposures, 1 before shooting, 2 while shooting – Canon T 90 User Manual
Page 152: Changing the preset exposures > 1 before shooting
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
<Changing the Preset Exposures >
1 Before shooting
1) Press both the shooting mode selector
and the metering mode selector at the
same time again.
2) While pressing both selectors, turn the
electronic input dial to change the preset
number of exposures,
3) Remove your fingers from both selectors.
2 While shooting
The operating procedeurs are all the same
as above.
90
Advertising