Canon T 90 - Manual (Page 50)

<Automatic Setting of the Film Speed >
A -so
7
"
The T90 is designed to automati­
cally set film speed by sensing
he DX code marked on the film
bassette.
1 When using a film with DX
code, you do not have to
set the film speed. (ISO
25-5000)
• The film speed automati­
cally set according to the
DX code will appear on
the display panel while
the camera is advancing
the film toward the first
usable frame. (Refer to
the left page.)
When using a film without
DX code, set the film
speed manually.
1) While pressing the film
Film passing through X-ray examinations at airports,
even when loaded In a camera, may be exposed
and ruined. To avoid accidental exposure, tell the
inspector you want your camera and film hand
l^hecked
speed button, turn the
electronic input dial until
the film speed (indicated
by ISO) of your film ap­
pears
on the display
panel, (ISO 6-6400)
2) Remove your finger from
the film speed button.
• The preset film speed
will appear and blink
on the display panel to
warn
you if the film
speed is not set.
Always be sure to set
the film speed correct­
ly. (Once the film
speed is set, the warn­
ing stops.) 31