Setting the safety shift function – Canon T 90 User Manual
Page 69
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
< Setting the Safety Shift Function >
1) Set the T90 to the shutter-priority AE (Tv) or
the aperture-priority AE (Av).
2) Press both the film speed button and the
exposure compensation button at the same
time for approx. 1 sec
3) The “ E ’’ mark indicating the safety shift
will then appear on the display panel and the
safety shift function will be activated.
4) To clear the safety shift function, press both
the film speed button and the exposure com
pensation button again until the “ E ”
disappears.
Note
Setting the safety shift function is possible in any
mode, but is effective oniy in the shutter-priority AE
and the aperture-priority AE modes.
44