Mow to use the metering modes, 2 partiai metering, 2 partial metering – Canon T 90 User Manual
Page 80: How to use the metering modes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4. Mow to Use the Metering Modes
1 Center-weighted average metering
This is the normai setting position used for
generai photography, and is recommended
especialiy for AE photography.
2 Partiai metering
With this metering system, the AE lock
mechanism is on as long as the shutter
button is being pressed haifway down.
1 ) Put the main subject in the center of the view-
finder so that the partiai metering mark
covers it.
2) Press the shutter button halfway and com
pose the picture. A red mark (AE iock
LED) wiii then appear in the viewfinder.
• If desired, whiie continuing to hold down
the shutter button, recompose the picture
so that the subject is not in the center. The
same exposure vaiue is kept locked in the
camera’s memory by the AE lock function
even when the picture is recomposed.
Partial metering mark
50