EFCO 960 Series - Manual (Page 42)

SEE THE DOOR SHIPPING CARTON FOR
Anchor through the glazing pocket
are plumb and anchored.
Install the door stop after the jambs
sealant from door jamb to
with flat head screws.
Attach through the threshold
at the jambs with flat head screws.
by the closed door.
Apply a continuous bead of
door jamb.
The fastener will be concealed
FIG. # 30
9154/9155
FIG. # 29
INTERIOR
FIG. # 28
Locate the fastener 6" from the ends
and 24" on center maximum spacing.
pocket with flat head screws.
Anchor through the header glazing
SEE PAGES 10 THRU PAGE 12 FOR DOOR HEADER
by the closed door.
The fastener will be concealed
9154/9155
(CONT.)
PAGE 40
W138
DOOR INSTALLATION INSTRUCTIONS.
W138
JDA 10/2000
SECTION VI - DOOR FRAME INSTALLATION
AND DOOR JAMB IDENTIFICATION.