Fig. # 52, Step 4), Step 3) – EFCO 960 Series User Manual
Page 53: Fig. # 51, 1/4" and 1/2" glazing adaptors
lower glass unit.
accommodate setting the
the ’ear’ up as shown to
need to be installed with
NOTE AT HORIZONTAL INTERMEDIATES ONLY:
The clips H260 or H261
FIG. # 52
Apply a bead of sealant across the length of the deflector,
FOR 1/2" GLASS
setting the glass unit below.
Care should be taken to not disengage the water deflector when
The clips H260 or H261 should be installed as soon as possible
before the sealant from step # 3 can setup.
to Fig. #53 on page 52.
the vertical member’s pocket. Refer to Fig. # 51 below and
and across the bulb gasket, and the end of the deflector at
STEP 4)
9666
L129
STEP 3)
FOR 1/4" GLASS
9667
JDA 10/2000
EAR
L129
SPP8
FIG. # 51
FOR 1/4" GLASS
9667
OF SEALANT
CONTINUOUS BEAD
L129
SPP8
CONT.
PAGE 51
1/4" AND 1/2" GLAZING ADAPTORS
SECTION VIII E -
SCREW SPLINE / SHEAR BLOCK
INSTALLATION
w/ L129 WATER DEFLECTOR