EFCO 960 Series - Manual (Page 60)

STRUCTURAL
SILICONE
5/8"
Fig. # 64
BITE
BITE
5/8"
1/2"
WM11
9635
2 9/16" B.M.
Install the W115 bulb gasket in the full length covers, allowing
approximately 2% extra per length, to minimize gasket shrinkage.
sealant from the glass surface, presenting a clean professional
appearance. This step will also require an overnight cure for the silicone.
Install the full length covers at the head, sill, and jambs.
as shown below. This step will require an overnight cure.
Install the exterior structural silicone to the glass joint. Clean any excess
Install the interior structural silicone to the glass/spacer tape/mullion,
are broken in this process.
The next day remove the temporary covers and replace any clips that
SECTION IX -
STEP 10)
STEP 9)
STEP 8)
STEP 7)
GLAZED MULLION
STRUCTURAL SILICONE
CONT.
PAGE 58
BAB 7/2001
WM11
9635
Fig. # 63
SPACER TAPE
STRUCTURAL
SILICONE
GAP FOR
GLASS
UNIT
GLASS
UNIT
STRUCTURAL
GAP FOR
SILICONE
H260 CLIP - 1" GLAZING
H261 CLIP - 1/4" GLAZING