EFCO 960 Series - Manual (Page 43)

FIG. # 32
JDA 10/2000
SECTION VI - DOOR FRAME INSTALLATION
SFP6
W127
W115
FIG. # 31
TRANSOM LITE GLAZING ADAPTOR
CUT LENGTH FORMULA FOR TRANSOM
APPLIED GLAZING = D.L.O. - 1/16"
PAGE 41
(CONT.)
9673
9674
APPLY A CONTINUOUS BEAD
OF SEALANT VERTICALLY
TO SET THE ADAPTOR INTO.
1/2"
GLASS BITE
APPLY SEALANT AS SHOWN
AT HEAD AND TRANSOM BAR
AND 1" EACH WAY IN THE
GLAZING BULB TRACK
IT IS NOT REQUIRED TO REMOVE THE EXTRUDED
DOOR STOP IN THE TRANSOM AREA TO APPLY THE
TRANSOM GLAZING ADAPTOR. THE ADAPTOR WILL
APPLY OVER THE FIN STOP.
THE FIN STOP WILL HAVE TO BE NOTCHED AT THE TRANSOM BAR.
TYPICAL JAMB
MEMBER
PERIMETER MEMBER
AT HEAD CONDITION
SHEAR BLOCK ATTACHED
11/16" D.L.O.