Cable path, Belt tension – ETS-Lindgren 2065 LoPro Turntable Electric-powered 1.2m Turntable (Archived) User Manual

Page 30

Advertising
background image

Operation

MODEL 2065 LOPRO TURNTABLE

26

© EMC TEST SYSTEMS, L.P. – APRIL 2002

REV F – PN 399230

CABLE PATH


There is a 1 cm (.40 in) high by 2.54 cm (1.0 in) wide slot on the
bottom side of the TT base that can be used to run 3/8 inch
maximum DIA cable from the side up through the center opening
of the TT.

BELT TENSION


The drive belt is furnished fully tensioned on new units. After
usage the belt may need to be tightened. (Refer to drawing 5 at the
back of this manual.) To take up any slack in the belt, loosen the 6
bolts on the gearbox, move it outward and retighten.

Archived 3/18/10

Advertising