ETS-Lindgren 2065 LoPro Turntable Electric-powered 1.2m Turntable (Archived) - Manual (Page 34)

Specifications MODEL 2065 LOPRO TURNTABLE
30 © EMC TEST SYSTEMS, L.P. – APRIL 2002
REV F – PN 399230
SPECIFICATIONS
ELECTRICAL
Nominal AC Voltage 115/230 VAC
Input Frequency 60/50 Hz
Current Rating 3.8/2.8 amps
RPM 1.2/1.0
Phase Single
Motor Horsepower
1/6 HP
MECHANICAL
Turntable Diameter 1.22 m (48 in)
Nominal Turntable
Height 50 mm (1.96 in)
Distributed Load Rating* 273 kg (600 lb.)
*Distributed Load Rating applies when load is evenly distributed
on top; no point loads under .19 sq. m (2 sq. ft) should exceed 100
kg (220 lb.); and not over 28.5 kg (63 lb.) should be applied to a 45
degree segment at the table’s outer edge.
Archived 3/18/10