Cisco WIRELESS ACCESS POINT WAP4410N - Manual (Page 52)

Configuring the Cisco WAP4410N Wireless-N Access Point
Status
WAP4410N Wireless-N Access Point with Power Over Internet Administration Guide 52
6
System Performance
The Status > System Performance page displays the access point’s status
information for its current settings and data transmissions. To check system
performance of the access point, follow these steps:
STEP 1 Click Status > System Performance.
This page displays the access point’s system performance values:
• Wired—The statistics for the wired network.
- IP Address—The access point’s local IP address.
- MAC Address—The MAC address of the access point’s wired interface.
- Connection—The status of the access point’s connection for the wired
network.
- Packets Received—The number of packets received.
- Packets Sent—The number of packets sent.
- Bytes Received—The number of bytes received.
- Bytes Sent—The number of bytes sent.
- Error Packets Received—The number of error packets received.
- Drop Received Packets—The number of packets being dropped after
they were received.
• Wireless—The statistics for the wireless network.
- Name—The wireless network/SSID the statistics refer to.
- IP Address—The access point’s local IP address.
- MAC Address—The MAC Address of the access point’s wireless
interface.
- Connection—The status of the access point’s wireless networks.
- Packets Received—The number of packets received for each wireless
network.
- Packets Sent—The number of packets sent for each wireless network.
- Bytes Received—The number of bytes received for each wireless
network.