Mercedes-Benz G-Class 2015 - Manual (Page 105)

X To switch on the standing lamps: the
SmartKey is not inserted in the ignition lock
or it is in position 0 (
Y
page 133).
X Turn the light switch to W (left-hand side
of the vehicle) or X (right-hand side of
the vehicle).
Headlamp cleaning system
The headlamps are cleaned automatically if
the "Wipe with washer fluid" function is oper-
ated ten times while the lights are on and the
engine is running (
Y
page 114). When you
switch off the ignition, the automatic head-
lamp cleaning system is reset and counting is
resumed from 0.
Combination switch
Turn signal
: High-beam headlamps
; Turn signal, right
= High-beam flasher
? Turn signal, left
X
To indicate briefly: press the combination
switch briefly to the pressure point in the
direction of arrow ; or ?.
The corresponding turn signal flashes three
times.
X To indicate: press the combination switch
beyond the pressure point in the direction
of arrow ; or ?.
High-beam headlamps
: High-beam headlamps
; Turn signal, right
= High-beam flasher
? Turn signal, left
X
To switch on the high-beam headlamps:
turn the SmartKey in the ignition lock to
position 2 or start the engine.
X Turn the light switch to L or Ã.
X
Press the combination switch beyond the
pressure point in the direction of arrow :.
In the à position, the high-beam head-
lamps are only switched on when it is dark
and the engine is running.
The blue K indicator lamp in the instru-
ment cluster lights up when the high-beam
headlamps are switched on.
X
To switch off the high-beam headlamps:
move the combination switch back to its
normal position.
The blue K indicator lamp in the instru-
ment cluster goes out.
Exterior lighting
103
Li
ghts
and
wind
sh
ield
wip
er
s
Z