Mercedes-Benz G-Class 2015 - Manual (Page 127)

Switching the ZONE function on/off
X To switch on: press the á button.
The indicator lamp in the á button lights
up.
i The temperature setting for the driver's
side is not adopted for the front-passenger
side and the rear compartment. The tem-
perature for the front-passenger side and
the rear compartment must be set sepa-
rately.
X
To switch off: press button á.
The indicator lamp in the á button goes
out.
i The temperature setting for the driver's
side is adopted for the front-passenger side
and the rear compartment.
Defrosting the windshield
You can use this function to defrost the wind-
shield or to defrost the inside of the wind-
shield and the side windows.
i You should only select the defrosting
function until the windshield is clear again.
X
Turn the SmartKey to position
2 (
Y
page 133) in the ignition lock.
X
To activate: press the ¬ button.
The indicator lamp in the ¬ button lights
up.
The climate control system switches to the
following functions:
R cooling with air dehumidification (only
with engine running)
R high airflow (depending on the outside
temperature)
R
high temperature (depending on the out-
side temperature)
R air distribution to the windshield and
front side windows
R
air-recirculation mode off
X
To deactivate: press the ¬ button.
The indicator lamp in the ¬ button goes
out. The previously selected settings are
restored. The cooling with air dehumidifi-
cation function remains on. Air-recircula-
tion mode remains deactivated.
or
X Press the à button.
The indicator lamp in the ¬ button goes
out. Airflow and air distribution are set to
automatic mode.
or
X
Turn controls : or B clockwise or coun-
ter-clockwise (
Y
page 119).
or
X Press the K or I button.
Activating/deactivating MAX COOL
maximum cooling
The MAX COOL function is only available in
vehicles for the USA.
MAX COOL is only operational when the
engine is running.
X
To activate: press the Ù button.
The indicator lamp in the button lights up.
X To activate: press off-road button Ù
again.
The indicator lamp goes out. The previously
selected settings are restored.
When you activate MAX COOL, climate con-
trol switches to the following functions:
R maximum cooling
R maximum airflow
R
air-recirculation mode on
Operating the climate control systems
125
Climate
control
Z