Mercedes-Benz G-Class 2015 - Manual (Page 267)

X Press OK OK to confirm the message.
The voice connection with the Customer
Assistance center is terminated.
The
Vehicle Diagnosis: Transfer‐ Vehicle Diagnosis: Transfer‐
ring data... ring data... message appears.
The vehicle data is sent to the Customer
Assistance center.
Depending on what the customer service rep-
resentative agreed with you, the voice con-
nection is re-established after the transfer is
complete. If necessary, you will be contacted
at a later time by another means, e.g. by e-
mail or phone.
Further functions of the vehicle remote mal-
function diagnosis include, for example:
R transfer of service data to the Customer
Assistance center. If a service is overdue,
the COMAND display shows a message
about various special offers at your work-
shop.
R monthly status information e-mail on oil
level, air pressure, maintenance, brakes,
etc. If applicable, you will receive informa-
tion on special offers in the e-mail.
USA only: this information can also be
called up under "Owners Online" at http://
www.mbusa.com.
Information on the data stored in the vehicle
(
Y
page 26).
Information on Roadside Assistance
(
Y
page 22).
Downloading routes
Downloading routes allows you to transfer
and save predefined routes in the navigation
system. To do this, an SD memory card must
be inserted into the COMAND system. If no
SD memory card is inserted, you must insert
the card into the card slot on the COMAND
system before saving.
A route can be prepared and sent either by a
customer service representative or via the
mbrace portal on the Internet. Each route can
include up to 20 way points. When a route has
been received by the navigation system, the
'Route name' has been saved to mem‐ 'Route name' has been saved to mem‐
ory ory card. card. Do Do you you want want to to start start route route
guidance? guidance? message appears on the
COMAND display. The route is saved to the
SD memory card.
X
To start route guidance: select Yes Yes .
An overview of the route is shown in the
display.
i If you select No No , the saved route can be
called up later in the navigation menu.
X
Select Start Start .
Route guidance is started.
i Downloaded and saved data can be called
up again in COMAND. Further information
can be found in the "COMAND", "Online
and Internet services" and "Download des-
tination/route" sections.
Speed alert
You can define the upper speed limit, which
must not be exceeded by the vehicle. If this
selected speed is exceeded by the vehicle, a
message will be sent to the Customer Assis-
tance center. The Customer Assistance cen-
ter then forwards this information to you. You
can select the way in which you receive this
information beforehand. Possible options
include text message, e-mail or an automated
call.
The data which is sent to the Customer Assis-
tance center contains the following informa-
tion:
R the location where the speed limit was
exceeded
R
the time at which the speed limit was
exceeded
R the selected speed limit which was excee-
ded
Geo fencing
Geo fencing allows you to select areas which
the vehicle should not enter or leave. You will
be informed if the vehicle crosses the boun-
daries of the selected areas. You can select
Features
265
Stowage
and
features
Z