Mercedes-Benz G-Class 2015 - Manual (Page 260)

use. Otherwise, you could suffer an electric
shock and be seriously or even fatally injured.
G WARNING
Any device that you connect must have a suit-
able plug and meet U.S. standards. Never pull
at a cable to disconnect a plug from a 115 V
AC power socket. Never use a damaged con-
nection cable. The 115 V AC power socket
must never be connected to another 115 V AC
power source. Do not use a converter with an
earthed plug for the 115 V AC power socket.
This could cause serious injury to you and/or
other people.
G WARNING
If the 115 V AC power socket is damaged or
pulled out of the trim, do not use or touch the
115 V AC power socket. The use of a 115 V AC
power socket that has been damaged or
pulled out of the trim could cause serious
injury to you or others.
115 V power socket : provides an AC volt-
age of 115 V so that small electronic devices
can be connected. These devices, such as
games consoles, chargers and laptops,
should not consume more than a maximum of
150 W altogether.
Requirements for operation of these devices:
R the 12 V sockets in the rear compartment
and the cargo compartment are opera-
tional (
Y
page 257).
R
the plug of the electronic device is plugged
into 115 V power socket :.
R the on-board power supply is within a per-
missible voltage range.
R
the electronic device's maximum power
output does not exceed 150 W.
X Open flap =.
X
Switch on the ignition.
X
Insert the plug of the electronic device into
115 V power socket :.
Indicator lamp ; lights up.
If indicator lamp ; does not light up,
please read the section on malfunctions.
X
To turn off: disconnect the plug from 115 V
power socket :.
Ensure that you do not pull on the cord.
X
Close flap =.
Possible causes of malfunctions:
R
the on-board power supply is not within a
permissible voltage range.
R the temperature of the DC/AC converter is
temporarily too high.
R some small electronic devices have a con-
stant nominal power of less than 150 W,
but a very high switch-on current. In that
case, there is a possibility that these devi-
ces will not function properly as 115 V
socket : is not able to provide a high
enough current.
X
If indicator lamp ; still does not light up,
contact a qualified specialist workshop.
mbrace
Important safety notes
!
You must have a license agreement to
activate the mbrace service. Ensure that
your system is activated and ready for use,
and press the E MB Info call button to
register. If one of these steps is not carried
out, it may not be possible to activate the
system.
258
Features
Stowage
and
features