Mercedes-Benz G-Class 2015 - Manual (Page 264)

MB Info call button
X
Open the stowage compartment under the
armrest (
Y
page 250).
X Press Roadside Assistance button : for
more than two seconds.
A call to a Mercedes-Benz Roadside Assis-
tance Representative is initiated. Indicator
lamp ; in Roadside Assistance button :
flashes while the call is active. The Con‐ Con‐
necting Call necting Call message appears in the
multifunction display and COMAND is
muted.
If a connection can be made, the Call Con‐ Call Con‐
nected nected message appears in the multifunction
display.
If a mobile phone network is available and
there is sufficient GPS reception, the mbrace
system transmits data to the Response Cen-
ter, for example:
R current location of the vehicle
R
vehicle identification number
R
vehicle model
R vehicle color
i The COMAND display shows that an
mbrace call is active. You can change to the
navigation menu by pressing the NAVI but-
ton on COMAND during the call. Voice out-
put is not available.
A voice connection between the Response
Center and the vehicle occupants is estab-
lished. You can obtain information on how to
operate your vehicle's systems, on the loca-
tion of the nearest authorized Mercedes-Benz
Center, and on further products and services
offered by Mercedes-Benz USA.
You can find further information on the
mbrace system at http://
www.mbusa.com
2 Log in under "Owners
Online".
i If the indicator lamp in MB Info call but-
ton : is flashing continuously and no voice
connection with the Response center has
been established, then the mbrace system
has not been able to initiate an MB Info call
(e.g. the relevant mobile phone network is
not available). The Call Failed Call Failed message
appears in the multifunction display.
X
To end a call: press the ~ button on the
multifunction steering wheel.
or
X
Press the corresponding COMAND button
to end a phone call.
Call priority
When service calls are active, e.g. Roadside
Assistance or MB Info calls, an emergency
call can still be initiated. In this case, an emer-
gency call will take priority and override all
other active calls.
The indicator lamp of the respective button
flashes until the call is ended. An emergency
call can only be terminated by the Response
Center. All other calls can be ended by press-
ing the ~ button on the multifunction
steering wheel or the corresponding
COMAND button for ending a telephone call.
i When an mbrace call is initiated,
COMAND is muted. The mobile phone is no
longer connected to COMAND.
However, if you want to use your mobile
phone, do so only when the vehicle is sta-
tionary and in a safe location.
2 USA only.
262
Features
Stowage
and
features