Oldcastle BuildingEnvelope Reliance StormMax High Performance - Manual (Page 20)

February 2014 18-Zone-Plug-Installation 1-866-Oldcastle (653-2278) www.oldcastlebe.com
HW-355 zone plug
Force sealant
into gasket race
Seal along tongue of
horizontal & across face and
tongue of mullion before
installing HW-355 zone plugs.
STEP 1
STEP 2
Tool sealant along top
of zone plug to form
a water tight seal.
ZONE PLUG AT HEAD
ZONE PLUG AT JAMB
ZONE PLUG AT SILL
Bottom side of
zone plug shown.
Seal top
side similar.
Seal jamb & sill
zone plugs same
as shown at left
Seal between head,
vertical mullion and
mullion cap
Seal between
sill, vertical &
mullion cap
ZONE PLUG INSTALLATION
FIGURE 2.4
2.4 Install and seal as shown in Steps 1 & 2. Use Dow Coring 795 or Tremco Proglaze SSG.
RELIANCE STORMMAX HIGH PERFORMANCE INSTALLATION MANUAL
Zone Plug Installation