Oldcastle BuildingEnvelope Reliance StormMax High Performance - Manual (Page 25)

February 2014 23-Pressure-Plate-Splice 1-866-Oldcastle (653-2278) www.oldcastlebe.com
PRESSURE PLATE SPLICE INSTRUCTIONS
Quarter points Quarter points
1/4" splice joint
1/8"min.
face cover
splice joint
118"
Face cover
(dashed)
FS-325
Fastener
Butt-spice isolator
as required (seal joint)
SEALING NOTES:
1. Prior to attaching face covers, seal between
pressure plates.
2. Attach face covers and seal joint (a foam backer
rod can be used to aid in sealing)
Attachment holes
Weep holes
1/8"min.
face cover
splice joint
Face cover
Pressure bar
(dashed)
Backer rod between face
cover and pressure plate
FIGURE 3.4a
Pressure Plate Splice
Face Cover
Splice
FIGURE 3.4b
Pressure Plate/Face Cover Splicing & Sealing at SSG Mullions
(Intermediate Horizontal Shown; Head & Sill Similar)
RELIANCE STORMMAX HIGH PERFORMANCE INSTALLATION MANUAL