SINGER S18 STUDIO Instruction Manual - Manual (Page 36)

36
Step 3
Fold back the left seam allowance. Fold the right
seam allowance under to form a 1/8” (0.2 to 0.3cm)
fold. Position the zipper teeth next to the fold and
secure in place with pins.
1 Lower fabric
2 End of the opening
3 Zipper teeth
4 1/8” (0.2 to 0.3cm) fold
5 Right side of the upper fabric
6 Opening size
7 Fold
8 Seam with basting stitches
Step 4
Set the stitch length and thread tension back to
the original settings on the sewing machine. Attach
zipper foot E with the pin on the right side.
Lower the foot onto the fold on the left side. Start
stitching at the end of the opening (2). Position the
needle so that the needle pierces the fabric next to the
fold and into the zipper tape.
Step 5
Stitch up the zipper on the fold.
Stop stitching 2” (5cm) before zipper foot E reaches the
slider on the zipper tape. Lower the needle slightly into
the fabric. Raise the foot and open the zipper. Lower
the foot and stitch the remainder of the seam.
9 Slider
10 2” (5cm) before the top of seam.
1
2
4
5
8
6
7
10
9
3
3
4
5
3