SINGER S18 STUDIO Instruction Manual - Manual (Page 74)

74
The elongation button is pressed when a
pattern that cannot be elongated has been
selected. Elongation is applicable only to
satin stitches.
The power is turned on again after auto
thread cutting has been interrupted.
The presser foot is raised before auto
thread cutting is completed.
Press the Thread cutter button
to finish auto thread cutting.
Lower presser foot and press
the auto thread buton.
The machine is started when it halts due to
overload.
The feed dog is dropped while sewing.
The bobbin winder spindle is locked while
winding a bobbin.
Wait for at least 15 seconds to restart.
Remove tangled threads around
bobbin case and auto thread cutting
device.
Do not drop or raise the feed dog
while the machine is running.
Turn off the power and remove
tangled threads around bobbin winder
spindle.
The machine is out of order due to a problem
in the item indicated.
(Example: “BM init error” means error in
initialization of stepping motor.) Go to www.singerco.com for
information on warranty and service
centers
pip Normal operation
pip-pip-pip Invalid operation or malfunction
Warning Sign Cause Action
Audible Signal
The LCD screen shows an
unfamiliar error screen. Turn the power off and turn it on again. Be sure to wait 15 seconds between
turning the power off and back on again.