SINGER S18 STUDIO Instruction Manual User Manual

Page 37

Advertising
background image

37

Step 6
Close the zipper right side of seam allowance up.
Be sure to have the left seam allowances open and
flat (12) spread right seam allowance flat.
From the right side baste the fabric and zipper tape
together with foot A. Refer to Step 2 for machine baste
set up.

11 Basting
12 Zipper tape under the seam allowance

Step 7

Position foot at the bottom of the zipper.
Check that the needle is positioned to sew just below
the zipper stop. Start topstitching at the seam and
stitch 3/8” (1 cm). Rotate needle to topstitch close to
the zipper coil almost to the top of the garment.
Stop 2” (5 cm) from the top of the zipper. Lower the
needle slightly into the fabric. Raise the foot and open
the zipper. Lower the foot and stitch the remainder of
the seam.

13 Basting stitches
14 Bottom of zipper 3/8” (1 cm)
15 Topstitching to top of zipper. Stitching is 3/8”

(1 cm) from the seam.

Step 8

Remove all basting stitches.

11

12

15

14

6

7

8

13

Advertising
This manual is related to the following products: