SINGER CE-150 Futura - Manual (Page 76)

INSTALLATION OF SOFTWARE
In order to start using the software on your PC you would
have to first install the contents of the CD to your PC. This
procedure is refered to as “installation procedure”. Please
follow the below listed instructions in order to successfully
install FUTURA on your personal computer.
The FUTURA software comes on a CD-ROM disc.
In most personal computers the default drive setting for a
CD-ROM drive is “D:”
Please insert the FUTURA CD-ROM into the CD-ROM disc
receiver in your PC.
After some seconds, the Installation procedure of the
software will start automatically.
In case this will not occur after a short while, you can run the
installation procedure manually by going to the “Start” option
of Windows, select “Run”, type “D:\FuturaStart. .exe” and click
on OK.
After some seconds the step by step installation of the
software begins with the Welcome window. You can always
abort the installation procedure by clicking on the “Cancel”
button.
Click on “Next” to move on the next screen.
After reading and agreeing with terms given in the License
Agreement, please click on “Yes”,
and again click on Next,
and then select the directory where the software should be
installed. It would be recommended to use the default
selected directory.
CD-ROM