If stitches are missing – SINGER XL-400 FUTURA Instruction Manual User Manual

Page 84

Advertising
background image

82

7

5

3

8

6

4

2

1

Reverse stitch button
Interrupteur couture arrière
Interruptor de puntadas

hacia atrás

Embroidered section

Section brodée

Sección bordada

Blank stitches resulting from thread breakage

Points vides résultant d’une rupture du fil

Puntadas en blanco resultantes de ruptura de hilo

Embroidering direction

Direction de broderie

Dirección de bordado

automatically stop

S’arrête automatiquement

Para automáticamente

1. If stitches are missing

If the embroidery machine detects that the thread has

broken, it may continue to embroider up to about eight

stitches without any thread (blank stitches) before it

automatically stops.

In such cases, use the following procedure to step back

through the embroidering data to the point for continuing.

1. Press the reverse switch (stitch return) to step back

through the embroidery data. The hoop will move

back one stitch at a time. Step back through the data

until the blank area has been completely passed

over.

2. Restart the embroidery machine and continue

embroidering.

HELPFUL INFORMATION FOR

EMBROIDERING WITH FUTURA

2. Computer screen says thread is broken,

machine lights are flashing lights and

making a beeping sound, but thread is

not broken.

Upper thread is not in the thread tension. Rethread

upper thread, (see page 16 - 17 “Threading the Top

Thread”.) Placing the small net that is supplied with the

accessories over the spool of thread may ensure that the

thread is unwinding properly.

Advertising
This manual is related to the following products: