Vinten Radamec AutoCam Multicontroller II - Manual (Page 22)

Multicontroller II Safety & Introduction
1-12 User Manual
Pan and Tilt Heads
From 1 to 6 AutoCam pan/tilt heads can be controlled by the Multicontroller II.
The head types can be any mix of HS-102P, HS-105P, HS-2010MH or HS-
2010R.
Tally
The tally input to the Multicontroller II is used to control the on air tally LEDs
on the control panel.
Switcher Control
The Multicontroller II provides RS-232C control of a video router for automatic
routing of the selected (on stick) camera to the video monitor.