Vinten Radamec AutoCam Multicontroller II - Manual (Page 26)

MultiController II Operation
2-4 User Manual
P/T REV (Reverse Joystick)
The Reverse Joystick switch (recessed button - lower left) sets the direction
sense of the joystick. This switch sets the direction sense for all cameras simul-
taneously. Normally, the stick behaves like a pan handle attached to the rear of
the camera. When you push the stick up, the camera lens tilts down. When you
push the stick down, the lens tilts up. Similarly, if you push the stick left, the
lens pans to the right, if you push right, the lens pans to the left.
In reverse joystick mode, the sense is reversed as though you are pointing the
lens with the joystick. Push down and the lens tilts down, push left and the lens
pans left, and so on.
There is no right or wrong way to operate the joystick - choose the mode that
you are most comfortable with.
Lens Focus
Lens focus is on the left control knob. It operates in the same way as a conven-
tional pan bar mounted focus control.
Time
The duration for Move transitions (described later) from one shot to the next is
set with the Time knob (lower center) and is indicated on the adjacent display.
The duration can be set from 0.5 up to 99 seconds - turn the knob clockwise to
decrease the time.
P/T Reverse Time
Focus